Douglas, you can use the Electric Jack w/ Footplate and 7-Way Plug # EJ-3527-BBX for an electric jack or the Buyers Products A-Frame Jack w/ Support Foot # 3370091265 for an manual option.
Both of these jacks would work great to replace the jack you currently have and would easily be able to handle your 17.5K trailer. view full answer...
Hi Tom,
I have two options to replace the electric tongue jack on your Jayco Whitehawk:
Option 1: Electric Jack w/ Footplate # EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and what it lacks in looks it makes up for in dependability. The simple design of this jack also allows for easier replacement of damaged or worn components unlike a lot of other jacks that require complete replacement when something malfunctions.
Option... view full answer...
Kyle, a direct replacement jack, no unfortunately. We do have plenty of other alternatives that you might be interested in though.
For instance, take a look at the Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheel # ORJW350D. This jack bolts around your trailer tongue using the included mounting hardware, has a 770 lb lift capacity, and has 12" of total lift. view full answer...
Ken, for the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack # TJD-5000-FT you can use the Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks # TJD-5000-FT for a replacement leg. view full answer...
Hey Richard,
You will not want to use the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 and SnapPad SnapJack SJ RV Scissor Jack Pads # SN32FR together, no. They use different hardware so are not compatible, but both will do a lovely job of helping stabilize your trailer. I'd go with the StrongArm to get the best possible stabilization because it connects from frame to foot as opposed to just a larger surface area foot. view full answer...
The Bulldog Square, A-Frame Jack # BD195318 is a unique jack with its mounting pattern and we currently do not have any other a-frame jack with the same mounting pattern. To switch back to a jack like the Bulldog Round, A-Frame Jack # BD1750290317 you are going to want to replace your Coupler # CA5400 or weld in a new section to bolt the jack onto.
The other option is installing a jack like the Fulton # HD50000101 which will mount to the frame tube. view full answer...
Hey James,
If the inner tube of the jack is bent then there's unfortunately not going to e a way to fix the jack and you'll have to use an angle grinder to cut off the old jack and replace it. If the wheel is detachable and the inner tube is still ok then we'd be able to just swap out the wheel.
If replacement is the only option then I recommend the Round Swivel Marine Jack w/ Wheel # MJ-1206B. This jack comes with brackets to clamp onto the frame so that you can easily move it around... view full answer...
Hello Parker. Unfortunately, we do not offer any replacement parts for the Binkley brand trailer jacks. We do offer some similar jacks from Bulldog and RAM, but we do not carry anything from the Holland Binkley brand. The only real solution I could offer would be to replace the jack entirely with something link the Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs # BD182815. view full answer...
It sounds like the gear is damaged and unfortunately there isn't a repair kit so you'd need to replace the jack # EJ-3520-BBX.
If you wanted to upgrade to a much nicer jack that raises and lowers really quickly we have the Phoenix part # UF38-944040 which can raise and lower in a matter of seconds. view full answer...
Hello Todd,
I'm sorry to say we don't have any type of rebuild kit like that; the best we can offer is a replacement 12k jack, the Square Direct Weld Jack - Drop Leg w/ Spring Return # TJD-15000SP-F. view full answer...
Hey Jeff, since you have a Bulldog powered 4k trailer jack part # BD500199 the correct replacement manual override rubber plug would be the part # BD500201. view full answer...
Hi David,
The light cover for Ram electric tongue jacks isn't sold on its own but you can get the whole head cover # EJ-3520-BCV which would include the light cover with it. view full answer...
Hey Loren, the axle of the wheel that comes on the Fulton F2 trailer jack part # F1413040134 that you referenced is 1/2 inch in diameter. We have a replacement wheel for this with the part # F500131. view full answer...
Good morning, Matt. We do offer a replacement tire for the Trailer Valet 5X Swivel Jack and Trailer Mover part # STC-V211, the Replacement Solid Rubber Tire for Trailer Valet Trailer Mover part # TVXLSR. There is no replacement wheel available though. It may be worth contacting the manufacturer directly to see if they can provide one. Otherwise, you would have to either find a way to re-use the old one or replace the dolly entirely. view full answer...
Hey Sam, what replacement parts are you looking for exactly? We should have a lot of parts for your trailer like tires, lights, wiring components, jacks, actuators or brake parts. Feel free to send me more info and I am happy to see what we can offer you.
I am afraid we do not have a manual of any kind that we can send. It may be worth contacting Demco directly though. They may have something helpful for you. view full answer...
Go To Results